- Services
-
Non Destructive Testing
- Nondestructive Testing Services
- Residual Life Assessment Studies and Risk Based Inspections
- NDT Consulting
-
Welding Consultation
- Welding and Heat Treatment Procedures
- Welder Qualification (AWS Accredited Test Facility)
- Weld Inspection & Testing
- Weldability Studies and Analysis
-
Construction Quality Audits
-
Technical Training
- Welding & Structural
- NDT
- Code Clinics
- Metallurgy
-
Metallurgical Investigations
- Metallurgical Studies
- Failure Analysis
- Reverse Engineering
-
Third Party Inspection
-
Corrosion Analysis
-
Mechanical Testing
- Tensile, Compression & Flexure Testing
- Impact Testing
- Hardness Testing
- Fatigue & Stress Rupture Testing
-
Chemical Testing
- Optical Emission Spectroscopy
- Atomic Absorption Spectroscopy
- Combustion Analysis
- Wet Chemical Analysis
-
Product Testing
-
Heat Treatment
- On Site Stress Relief Heat Treatment
-
- Our Firm
- Literature
- Clients
- Contact Us
May 10, 2010
AEIS receives AWS Accreditation to Certify Welders
April 10th, 2010
AEIS passes AWS Accredited Test Facility Audit with Flying Colors.
AEIS was audited by the American Welding Society to perform "Certified Welder" tests as an "Accredited Test Facility". The audit went very smoothly with the auditor appreciating our Quality Manual, Facility and Personnel. Kudos to the AEIS team at Linden, NJ. As of November 1st, 2009, NYC Building Code requires all welders (Structural and piping) working in the NYC to possess either AWS or NYSDOT certification.
http://www.nyc.gov/html/dob/html/licenses/welder_license.shtml
After receipt of formal documentation from AWS next week, we shall be able to administer the AWS CW certification examination at our facility in Linden, NJ OR at the client's facility.
March 25th, 2010
AEIS is awarded contract for NDT Audit of fabrication facility in Spain.
February 26th and 27th, 2010
AEIS Technical Director, Nagesh Goel, presents lectures at welding workshop held at Indian Institute of Technology, New Delhi. Topics presented were: “NDT of GMAW Weldments” and “Defects causes and cures of GMAW Welds”(Front Page: Workshop at IIT, Delhi)
February 1st, 2010
AEIS provides welding and NDT consulting services to piping fabricator in North India.
July 29th, 2009
AEIS conducts ICC High Strength Bolting Exam preparatory course in Linden, NJ
August 15th, 2009
AEIS conducts AWS CWI training course in Linden, NJ.
August 3rd, 2009
AEIS starts metallurgical laboratory in NY Metro Area.
AEIS continues to grow with the addition of Metallurgical and NDT laboratory in Linden, NJ. The laboratory is headed by Herbert Goldenberg, P.E., former owner of City Testing & Research Laboratory, Rahway, NJ.
March 23rd, 2009
AEIS conducts ICC High Strength Bolting Exam preparatory course in Midtown Manhattan.
April 4th, 2009
AEIS conducts AWS CWI training course at its Yorktown Heights, NY facility.
February 28th, 2009
AEIS conducts AWS CWI training and examination at its Yorktown Heights facility.
February 2nd, 2009
AEIS starts operations in NY Metro Area.
AEIS opens office in Yorktown Heights, NY and stats providing inspection, welding/ NDT consultation and technical training services.
- New York
- New Jersey
- New Delhi